Used FM GRU Cranes Thousand Oaks

Topless Cranes and Flat Top Cranes
The ease and speed of the erection of flat top and topless cranes have truly impressed operators and technicians alike. Several parts come preassembled at the factory. In addition, a lot of the electrical, and mechanical components, and their quick couplings have attained a 20 percent decrease in erection times than the prior CTY Crane Series. In order to ensure the crane is working in absolute safety, every phase of the crane has been thoroughly studied, planned and tested.

Ecological paints and low level acoustic emissions are provided by FMgru cranes. In addition, on request, low environmental impact tints can be used to show the clients and consumers the care of the company has for both the natural world in addition to assuring protection of the numerous areas where these machines are used. The company takes pride in making environmentally sound decisions whenever possible.

The TLX Series cranes are designed and manufactured so as to be transported easily by trailers, trucks and containers. These models can be disassembled with each component of the crane breaking down to less than 6 meters length and low weight so as to facilitate the transport in narrow places. This general design makes them a great choice for easy assembly and transport.

Tower Cranes, Saddle Jib Cranes
Both Tower Cranes and Saddle Jib Cranes could be assembled easily and quickly. They are specially engineered and designed to guarantee safety conditions throughout all of their operations. TCK's fast erecting cranes are designed and manufactured to guarantee the best safety standards in each working situation and assembly.

The counter-jib and the jib are able to mesh together without any dangerous adjustments being required because of the way the hinges couple to the center plate. The distribution, slewing and lifting parts of these cranes are very strong, reliable and simple. These components are controlled by a frequency inverter that allow smooth and fast movements in order avoid overstress of the structure of the crane.

• Used Pecco Tower Cranes Thousand Oaks
  Various KInds of Crawler-Mounted Cranes In order to be able to power a large variety of equipment, industrial wheel tractors were modified during the 1920s, by Fordson and McCormick-Deering. For instance, half-swing cranes and shovels... More
• Used TCM Cushion Tire Forklifts Thousand Oaks
  On the market these days are lift trucks which are classed in 7 various categories. Classes 1-4 consist of forklifts that are designed specially to use on smooth surfaces indoors. They may be selected for... More
• Used Snorkel Knuckle Boom Lift Thousand Oaks
  The knuckle boom crane is somewhat like a typical crane with one key difference. The boom is capable of folding back similar to a finger. In essence, the boom articulates at the "knuckle" near the... More
• Used Kalmar Reach Stackers Thousand Oaks
  Reach Stackers come in IH, intermodal handling units and container handling or CH models for high density container stacking use up to 3-rows deep and 6-high. These various models enable many different tasks to be... More
• Used Nissan Double Reach Forklifts Thousand Oaks
  Reach trucks or narrow aisle trucks have become more common thanks to their ability to decrease their floor space and aisle count requirements. These equipment have a trade-off; the requirement is for more specialized equipment... More