In the majority of situations, most individuals spend quite a bit of money purchasing their lift truck. Therefore, it is very important to take proper care of it so as to protect your investment well into the long run. It is a great idea to know the procedures that are carried out in the care and maintenance of this piece of equipment.
By starting up the forklift and listening carefully how it works is amongst the best ways to tell how good the engine is running. For instance, if there are any misses or knocks, the equipment is faulty and this must raise some issues. Moreover listen closely for any squealing sounds that come from the belts since these sounds would provide you with a wealth of information.
When carrying out maintenance, some of the main components you would need to pay attention to consist of the horn, safety warning devices, gauges, the overhead guard and the lights. Any burnt out light bulbs or faulty components need to be replaced as soon as they are noticed. It is also vital to check the wiring.
After the above components have been checked carefully, proceed to the battery compartment to be able to see if the terminals are clean. If the terminals are not clean, be sure to clean them well. Every cell of the battery must be inspected so as to make sure that the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the machine and then change the filters. The hydraulic filter, the transmission filter and the fuel filters must be regularly replaced. Prior to fitting them, be sure to write the date on the new filters by utilizing a permanent marker in order to keep track.
Once the oil change has been carried out and new filters have been fitted, visually check the drive axle from beneath the equipment. Be certain to grease the axle if there is any grease fitting. Inspect the belts on the engine for any cracks or frays. If you find any, fix the problem accordingly. Afterwards, check each and every other part of the machine like the wheels. If any kind of fault or concern is detected, be sure to address it immediately so as to make sure the machinery is running at its safest and optimum levels.