Used Cushion Tire Forklift Thousand Oaks - While forklift trucks are often classified by the type of work they perform under most circumstances, forklift trucks can also be classified by the type of tire they are fitted with. The two types of tire classification for forklifts are:
1. Cushion; and
2. Pneumatic.
It is vital to note that there are benefits and drawbacks to both types of forklift tires; cushion and pneumatic. The drawbacks and benefits of cushion tire models can be only compared when the drawbacks and benefits of the pneumatic tires are also discussed.
Forklift Tire Classifications
Cushion Tires
Cushion tires feature solid rubber that is either smooth or treaded and fixed or positioned around a baseband or metal ring. These types of forklift tires are easier to maintain and less expensive to manufacture. Cushion tires have been designed to work on smooth surfaces such as interior loading docks and warehouse floors. Cushion tires are also better suited to applications in tight spaces. This is because they offer a turning radius that allows for movement around tight corners. Cushion tires enable the forklift to be situated closer to the ground, increasing the vertical clearance in comparison to other models that rely on pneumatic tires. Pneumatic tires provide better traction compared to cushion tires; especially on wet surfaces and outdoor locations.
Cushion tire forklifts are used for a wide range of applications, including order picking, unloading shipments, organizing inventory, transporting to and from a loading dock and other similar applications.
Pneumatic Tires
Pneumatic tires, on the other hand, are primarily designed to operate in rougher terrain, with uneven surfaces. These tires have two categorizations:
The solid resilient pneumatic tires are comprised entirely of rubber and the standard air pneumatic tires feature a layered rubber design filled with air.
For locations with uneven surfaces and unpaved ground, pneumatic tire forklifts are prime choices. The solid resilient pneumatic forklift tires are best used in areas such as lumber yards or junkyards and construction sites where there may be sharp metal items on the ground which could puncture the tires.
Benefits of Cushion Tire Forklifts
Cushion tire forklifts can be used inside and outside on smooth surfaces. The majority of forklifts that rely on cushion tires are used mostly indoors with limited outdoor use. Warehousing applications and manufacturing facilities often rely on cushion tire forklifts. Warehousing and narrow aisles and tight locations all rely on the benefits of cushion tire forklifts.
Some benefits of using a cushion tire forklift over a pneumatic tire forklift are:
1) Maneuverability
Maneuverability is one of the key pneumatic tire forklift benefits since these models do not require a larger frame to facilitate a bigger internal combustion engine.
2) Lower Clearance
Indoor cushion tire forklifts have lower clearance compared to pneumatic models; allowing the machine to travel easier through doorways and around lights or sprinkler obstacles.
3) Durability
Cushion tires for forklifts are durable, easy to maintain and have little to no risk of puncture.
4) Quiet
Because the majority of cushion tire forklifts are powered by battery or fuel cell, instead of an internal combustion engine, they are much less noisy than propane or diesel powered forklifts.
5) Environmentally Friendly
Powered by electricity instead of relying on an internal combustion engine enables cushion tire forklifts to make zero dangerous emissions.
Forklift Tire Choice
The majority of forklift frames specify either a pneumatic tire or a cushion tire. Tires and axles are specific to the lifting capacity and the machine’s frame. Forklift manufacturers create models that safely operate with certain tires and wheels, typically pneumatic tires or cushion tires. Because of this, it is more useful to choose the best forklift type, considering the type of tires the forklift will require and how it fits the job application, rather than attempting to modify the forklift by choosing the right tire for the application.
Workplace Applications
Suitable Work Applications for Cushion Tires
Cushion tire forklifts are usually the best option for many workplace applications. If the majority of the load lifting, transporting and placing will occur indoors or with only moderate outdoor usage on smooth surfaces, then cushion tires are likely the best option.
Forklifts fitted with cushion tires often have a smaller frame and sit much lower to the ground than forklifts fitted with pneumatic tires. This gives them better clearance for fitting through doorways and avoiding overhead obstacles. It is important to note that cushion tire forklifts showcase less ground clearance and the machine may get caught up on exterior obstacles if the ground is uneven. One solution to this problem is to fit the cushion tire forklift with traction tires on the front of their forklifts. Tires that offer traction will perform better on wet surfaces, rough terrain, packed gravel and asphalt. Traction tires are not used on dirt or grass locations and need to be installed on opposite sides, the drive and steer axles.
The smaller turning radius on the cushion tire forklifts is one of their main advantages. Their ability to work in compact locations makes cushion tire forklifts excellent for warehousing and manufacturing operations. Locations that rely on narrow aisles will benefit greatly from the smaller cushion tire forklifts and their tight turning capabilities. Pneumatic tire forklifts are more expensive and less available compared to cushion tire forklifts.
Suitable Work Applications for Pneumatic Tire Forklifts
Outdoor applications working on gravel benefit from pneumatic tire forklift models thanks to the air in their tires. Some interior locations may utilize pneumatic tire forklifts; however, they do not offer a small turning radius or the lower clearance and maneuverability that the cushion tires provide. Of course, they are often powered by internal combustion engine so do produce harmful emissions which are not recommended for normal indoor use. With a wider base and longer frame in comparison to cushion tire models, pneumatic tire forklifts are for use mainly outdoors.
There are two kinds of pneumatic tires; the air-filled pneumatic tire is less expensive than the solid pneumatic tire. The solid pneumatic tire has no air inside and is made from solid rubber. This design makes the tire stronger against punctures or gouges. Outdoor areas including lumber yards and scrap yards that feature copious amounts of metal debris and nails often rely on solid pneumatic tires. Air pneumatic tires work great outside on gravel and asphalt applications. Air-filled pneumatic tires can easily become punctured and their working environment needs to be evaluated carefully. Due to their susceptibility for getting gouged or punctured, the work location must be free from sharp debris before driving the air pneumatic tires. Since air-filled tires deliver a bouncy sensation, they contribute to operator fatigue and discomfort. Therefore, many air pneumatic tire forklift users prefer to foam fill their tires. The foam filling option creates a more even ride compared to the solid pneumatic tires or the bounciness of the air-filled pneumatic tires. Foam filling is also used to help prevent flat tires. It takes roughly three days to fill and cure an air pneumatic tire with foam.
Difference in Load Capacity
Both cushion tire and pneumatic tire forklifts offer similar load capacities. There may be lift limits on certain electric-powered cushion tire models. Pneumatic tire and cushion tire forklifts are available in practically any load capacity. Load capacities come in a wide range - from less than 2,000 pounds to more than 200,000 pounds.
Cushion Tire Forklift PDF
